BioGuard's Most Complete Algicide!

A weekly, dual-action algicide formula that uniquely combines the benefits of both quad and copper-based algicides to provide broader-spectrum control of all types of algae.

The easy-pour, easy-dose bottle features a 4 oz dosing cap to make application easier.

If algae outbreak does occur there's no need to buy another product because Algae Complete can serve as a remedy treatment by using the stronger does noted on the label.

Prevents and kills green, mustard, and black algae
For ALL pool sizes and ALL pool types

Features

Easy-pour, easy-dose bottle with 4 oz. dosing cap
Non-foaming
Season-long all-around performance
Compatible with chlorine, bromine, Mineral Springs^®, and saltwater systems
Combines both quat and copper-based algicides
Active ingredients: Poly [oxyethylene (dimethyliminio) ethylene dimethyliminio) ethylene dichloride] 6.50%
Copper sulfate pentahydrate** 13.07%
**Metallic Copper 3.3
Do not use in SoftSwim^® or other biguanide systems

Benefits

Kills and prevents green, mustard and black algae
Effective hybrid product
Results in 24 hours
For all pool surface types

What it does

Algae Complete^®is a highly effective, fast-acting swimming pool algae destroyer. It kills and prevents all types of pool algae. It is formulated to complement most swimming pool sanitizers. Algae Complete^®is non-foaming and can be used in pools with attached spas or jetted returns.

Directions for use

Test water prior to treatment, chelate existing metals with Pool Magnet^® Plus according to label instructions.
Clean filter and adjust pH to 7.4-7.6.
Establish and maintain proper free chlorine or total bromine residuals.
Vacuum leaves and other debris from pool.
Apply product with the pump running according to instructions below:

To prevent algae:

Apply an initial dose of 8 oz. per 10,000 gallons.
Apply a maintenance dose of 1.5 oz. per 10,000 gallons weekly.
Apply more often if pool water is diluted by heavy rain, frequent backwashing or partial drain and refill.
Do not swim for 15 minutes after application.

For treatment of visible algae:

Apply 1 lb. of BurnOut^®3 per 6,000 gallons, 1 lb. of BurnOut^®73 per 16,500 gallons or 1 lb. of Smart Shock^®per 12,000 gallons with the pump running.
Circulate for one hour.
Add 16 oz. of Algae Complete^®per 10,000 gallons directly into pool water, concentrating on areas of heaviest growth.
Circulate 24 hours.
The next day, thoroughly brush pool surfaces.
Do not swim until sanitizer residual has returned to the ideal range.

Product Notes:

In cases of persistent algae, repeat application after 2-4 days.
Clean the filter with Strip Kwik^® after treatment

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children

Pool Opening Services

Pool Opening Kit

Hot Tub Water Care